无机化学实验 pipet.docxVIP

Pipet A pipet is used to measure small amounts of solution very accurately. A pipet bulb is used to draw solution into the pipet. Using a Pipet Start by squeezing the bulb in your preferred hand. Then place the bulb on the flat end of the pipet. Place the tip of the pipet in the solution and release your grip on the bulb to pull solution into the pipet. Draw solution in above the mark on the neck of the pipet. If the volume of the pipet is larger than the volume of the pipet bulb, you may need to remove the bulb from the pipet and squeeze it and replace it on the pipet a second time, to