[精品论文]塑料粉末静电喷涂生产线.doc

摘要 塑料粉末静电喷涂工艺在世界上已经被广泛地用于金属制品的表面防腐和装饰，在我国属于“七五”期间的重点推广的新工艺。单体液压支柱油缸一般采用的是外表面喷漆达到防腐和装饰的目的。但是由于喷漆既浪费能源又造成社会公害，还存在发生火灾的可能性，同时工艺也比较复杂，生产效率低满足不了生产的发展，为改善上述状况，应用新的技术，决定采用塑料粉末静电喷涂这种工艺，上一条生产线解决单体支柱油缸外表面的装饰问题。采用静电喷涂生产线可以有效的提高静电喷涂的效率，节约大量的工时。同时生产线现广泛用于生产车间，将各个分散的工序通过生产线这个媒介而组合在一起，使得生产得以集中化，便于管理和生产，这也是生产效率提高的主要原因。塑料粉末静电喷涂生产线可以循环式生产操作，从而使工人的生产操作流线化，降低工作强度，使得艰苦的工作可以轻松的完成。 关键字：静电喷涂生产线 滚子链 链轮 机械传动 Abstract The plastics powder static electricity sprays to draw the craft at have been used for the surface antisepsis that metals product broadly with decorate in the world, belong to the new craft that the point of the period in "7 5" expand at the our country.The single body fluid presses a the pillar oil urn adopts now of is an outward appearance to spray the paint attain the antisepsis with the decorative purpose.But because of spraying the paint since the wasted energy results in the social harmful effects again, still exsits the possibility of the occurrence a fire, the craft is more complicated at the same time too, produce the efficiency is low satisfy not the development of the production, for improving the above condition, apply the new technique, decide to adopt the plastics powder static electricity sprays to draw this kind of craft, last a production line solution single a pillar oil an outside and superficial adornment problem.The adoption static electricity sprays to draw production line can effectively of the static electricity of exaltation sprays the efficiency that draw, economizing a flood of man-hour.The production line is extensive now to used for at the same time the production car a work for, will eachly asunder preface passes production line this medium and the combination is together, making produce can concentration turns, easy to management with produce, this is also a main reason to produce efficiency increases.The plastics powder static electricity sprays to draw production line can then the circulate type produces the operation, from but make the