行動多媒體通訊標準參考模式ReferenceModels.pptVIP

行動多媒體通訊標準參考模式(Reference Models) 報告者：陳俊義 Outline Introduction Subnetwork-Layer Mobility Network-Layer Mobility Transport-Layer Mobility Application-Layer Mobility Conclusion Introduction Mobility means the ability of a mobile host (MH) to overcome the location-dependent nature of IP address by a suitable translation mechanism, and to send and receive datagrams efficiently from any location. Introduction Subnetwork-Layer Mobility GPRS (General Packet Radio Service) UMTS (Universal Mobile Telecommunication System) UMTS Universal Mobile Telecommunication System (UMTS) is currently being developed with Europe as a third generation system for mobile telecommunication. UMTS Features: Support broadband flexible bandwidth allocation Support multimedia and internet services up to 2 Mbs Integrate the provision of cordless, paging, and broadband mobile services into one system. Support hign mass market service provision efficiently and at a low cost. Be a global system allowing global roaming and global service provision. UMTS Functional Architecture Building upon the concepts of GSM by extending the separation between the switching layer and the service and mobility layer across the whole system. Recognise that the access network structure and capabilities will vary depending upon the environment that it is being served (e.g. domestic, business, satellite environments). Support the different access networks by providing a common interface structure. UMTS Functional Architecture Mobility Procedures-Handover When an access network part identifies that a handover between cells dose not solely take place within its control domain (e.g. access network 1), it passed control to the Service Control Point (SCP) to continue handover processing. Mobility Procedures-Handover The SCP then attempts to identify which access network the target cell is in based upon information provided by the mobile terminal and then ascertains whether the target cell is within its control domain. If