混凝土施工技术要求（英文technical specifications for concrete）.doc

Page PAGE 1 of 11 TECHNICAL SPECIFICATIONS FOR CONCRETE CONSTRUCTION FormworkS Form Assembly 2.1.1 Form joints/seams shall have no grout leaking. Before placing concrete, form board shall be moistened with water, but 2.1.2 Form material shall be either steel, plywood, plastic, etc, the supporting frame shall be 2.1.3 The contact surface between the forms and concrete shall be cleaned and applied with 2.1.4 Before placing concrete, the foreign matters in the forms 2.1.5 When the cast-in place reinforced concrete girder/slabs with span no less than 4 meters; its forms shall be arched