国家标准《钼条和钼板坯》英文版（送审稿）.docVIP

GB/T 3462-2017 PAGE 2 PAGE I Issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China(AQSIQ)China National Standardization Management CommitteeImplementation date:2018-06-01 Issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China(AQSIQ) China National Standardization Management Committee Implementation date:2018-06-01 ImplementationImplementationImplementationImplementationImplementatioplementationImplementation Issue date:2017-07-12 Bars and plate blanks of molybdenum 钼 条 和 钼 板 坯 (English Translation) GB/T 3462-2017 Replace GB/T 3462-2007 National Standard of the People’s Republic of China ICS 77 H Foreword SAC/TC 243 is in charge of this English translation. In case of any doubt the contents of English translation, the Chinese original shall be considered authoritative. This standard was drafted according to the rules of GB/T 1.1-2009. This standard superseded GB/T 3462-2007 Bars and plate blanks of molybdenum This standard compared with GB/T 3462-2007and mainly had the following changes: --The product brand has been modified; --The product usage has been deleted； --The chemical composition and physical properties of the product were modified --The product size and shape were modified； --The sample size and location were modified； --‘Product storage period should not exceed more than 6 months’ was deleted; This standard indicated by China Nonferrous Metal Industry Association This standard shall be centralized by the National nonferrous metals standardization administration Technical Committee (SAC/TC 243) of China. This standard will replace previous published editions as followed: --GB/T 3462-1982; GB/T 3462-2007. PAGE 1 Bars and plate blanks of molybdenum Scope This standard specifies the requirements for molybdenum strip and molybdenum plate, test method, Inspection rules and marks, Packing, Logistic, Reserve, Test cert