solidworks运动仿真讲义.ppt

共享优质文章 内容仅供学习 * * * * * * * Problem Statement Open Forklift_Lifting.sldasm Pictured above is a common forklift. The objective of this exercise is to lift the Crate from the 原点al position to the top of the forklift (1.8m) over a one second interval. Hopefully the forklift will not tip over. Define Moving and Ground parts. Measure the reaction force on the front and rear wheels. * Add Motion To simulate the Fork lifting the Crate, we will use a displacement step function. After selecting the Properties option for the translational joint, choose Step as the Function from the drop down, and