VW44045_EN_2009-01-01_-_PP-PE大众汽车标准.pdf

VW 44045 Group Standard Issue 2009-01 Class. No.: 55111 Descriptors: polypropylene, PP, homopolymer, copolymer, non-reinforced, reinforced D Polypropylene, Finished Parts Material Requirements Previous issues VW 44045: 1970-02, 1972-12, 1974-03, 1976-12, 1986-12, 2002-10, 2008-06 Changes The following changes have been made as compared to VW 44045: 2008-06: – Typographical mistake in German version corrected – Referenced documents updated 1 Scope This standard specifies the material requirements for finished parts made from polypropylene ho‐ mopolymers and copolymers, non-reinforced and reinforced (see also Table 1). 2 Description Description example for polypropylene homopolymer, heat-stabilized, no color: PP according to VW 440 45-PP2, no color 3 Requirements 3.1 General requirements Approval of first supply and changes according to Volkswagen standard VW 01155. Emission behavior according to VW 50180 (if required in the drawing). Resistance to open air weathering according to VW 50185 (if required in the drawing). Colorimetric evaluation according to VW 50190 (if required in the drawing). Avoidance of hazardous substances according to VW 91101. Check standard for current issue prior to usage. Page 1 of 11 This electronically generated standard is authentic and valid without signature. The English translation is believed to be accurate. In case of discrepancies the German version shall govern. Numerical notation acc. to ISO practice. Technical responsibility Standards d