欧洲标准化委员会ISO_14271;2011_Cor_1;2012.pdfVIP

INTERNATIONAL STANDARD ISO 14271:2011 TECHNICAL CORRIGENDUM 1 Published 2012-04-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  МЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИ  ORGANISATION INTERNATIONALE DE NORMALISATION Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds TECHNICAL CORRIGENDUM 1 Soudage par résistance — Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 14271:2011 was prepared by the International Institute of Welding, which has been approved as an international standardizing body in the field of welding by the ISO Council. Requests for official interpretations of any aspect of this Technical Corrigendum should be directed to the ISO Central Secretariat, who will forward them to the IIW Secretariat for an official response. Page 4, 7.2, Paragraph 1 Delete traverses, insert traverse. Page 3, Figure 1, Title Delete locations, insert location. ICS 25.160.40 Ref. No. ISO 14271:2011/Cor.1:2012(E) Licensed to Mr. gangur ISO Store order #: 10-1382439/Downloaded: 2014-03-12 © ISO 2012 – All rights reserved Single user licence only, copying and networking prohibited Published in Switzerland ISO 14271:2011/Cor.1:2012(E) Page 3, Figure 2 In the title, delete locations, insert location. In the key, delete 2 electrode indentation, insert 2 electrode embossment Page 5, Figure 4 a) Delete the existing graphic and insert the following: Licensed to Mr. gangur