移动龙门吊 起吊装置设计.docVIP

移动龙门吊起吊装置设计（全套CAD图纸） 全套CAD图纸,联系 695132052 移动龙门吊起吊装置设计 学 生:陈 勇 指导老师:全腊珍 湖南农业大学东方科技学院,长沙 410128 摘 要:移动式龙门吊是一种应用非常广泛的起重机械,它常用于工地、码头和工厂中重型货物的起升和转移。本设计主要任务是对起吊机构、移动机构和自锁机构的设计。采用许用应力法和计算机辅助设计法进行设计。设计过程先用估计的门式起重机各结构尺寸数据对起重机的强度、疲劳强度、稳定性、刚度进行粗略的校核计算,待以上因素都达到材料的许用要求后,画出龙门吊小车结构图,然后计算出移动小车功率和起吊机构功率,再用此功率来选择电动机。以电机功率和额定起重重量作为技术参数来计算和选择联轴器、轴承和其他部件。若未通过,再重复上述步骤,直到通过。同时在设计中参考了各种资料, 文献 来完成此次设计. 本设计方案通过反复斟酌, 认真讨论, 反复校核, 力求设计合理;同时通过计算机辅助设计方法, 充分发挥计算机的强大辅助功能, 力求设计高效。 关键词:门式起重机; 机构设计; 吊钩; 移动小车 Mobile Gantry Crane Lifting Mechanisn Design Author:Chen Yong Tutor:Quan La-zhen Oriental Science Technology College of Hunan Agricultural University, Changsha 410128 Abstract:Designed using allowable stress method, and computer-aided design of metal structures of Mobile gantry crane crane Mobile gantry crane design. Design first with the estimated size of the data Mobile gantry crane crane on the crane structure, strength, fatigue strength, stability, rigidity for rough checking calculation, these factors have to be allowable to the material requirements, draw Mobile gantry crane structure .Then calculate the main beam and side beam weight load, and then load the Mobile gantry crane this exact strength and stiffness of checking calculation. If not passed, then repeat the above steps until approved. Since the beginning of the school is the Mobile gantry crane is listed in the draft, no record in the design manual, only the essence of the school record the process of Mobile gantry crane. Reference to the design of various types of information, using various means, to use a variety of conditions to complete the design. By the design, various designs, and repeated discussion on the nuclear and try to design and reasonable. through a computer-aided design and the advanced experience of reference for innovation. Key Words: Mobile gantry crane crane; institutions designed; hook;mobile car 1.前言 门式起重机是门架在高架轨道上运行的一种门架型起重机,又称天车。门式起重机的门架沿铺设在两侧高架上的轨道纵向运行,起重小车沿铺