轴的ansys画法讲解学习.docVIP

第一次作业 轴 创建圆柱体 Main menuPreprocessorModelingCreate VolumesCylinderSolid Cylinder X=0, Y=0, Radius=15, Depth=25; X=0, Y=0, Radius=20, Depth=-80; 转移工作平面并建圆柱体 Utility Menu: Work Plane Offset WP to XYZ Locations+ X=0, Y=0, Z=-80; Main menuPreprocessorModelingCreate VolumesCylinderSolid Cylinder X=0, Y=0, Radius=27, Depth=-6; 转移工作平面并建圆柱体 Utility Menu: Work Plane Offset WP to XYZ Locations+ X=0, Y=0,Z=-86; Main menuPreprocessorModelingCreate VolumesCylinderSolid Cylinder X=0, Y=0, Radius=15, Depth=-25; 转移工作平面并建圆柱体 Utility Menu: Work Plane Offset WP to XYZ Locations+ X=0, Y=0, Z=-111; Main MenuPre