淬火炉安全操作规程.docVIP

淬火炉安全操作规程 Safe operation rules for quenching furnace 一、开机前的准备 Preparations before starting up 1.关闭各控制柜门并检查门碰开关可靠有效； Close all control cabinet and check whether door touch switch is reliable and effective; 2.检查控制面板指示灯完好；检查各接地线可靠连接。 Check whether indicator light of control panel is in good condition; Check whether grounding wire is reliably connected. ? 二、开机作业 Starting up operation ①将热电偶引线“+ -”接于仪表后部接线端。 Connect the lead of thermocouple“+ -”with terminal located in the rear part of gauge. ②将电进线和输出线按接线图所示，接于控制器接线板上。 Connect input line and output line with the wiring board of controller accordin