英国石油公司（BP）标准 GIS 06-403 - the Application of Three-layer Fusion Bonded Epoxy-P - 0900a866801b62b5.pdf

Document No. GIS 06-403 Applicability Group Date 15 February 2007 Guidance on Industry Standard for the Application of Three-layer Fusion Bonded Epoxy-Polyethylene Coating and Three-layer Fusion Bonded Epoxy-Polypropylene Coating Systems to Line Pipe GIS 06-403 BP GROUP ENGINEERING TECHNICAL PRACTICES 15 February 2007 GIS 06-403 Guidance on Industry Standard for the Application of Three-layer Fusion Bonded Epoxy-Polyethylene Coating and Three-layer Fusion Bonded Epoxy-Polypropylene Coating Systems to Line Pipe Foreword This is the first issue of Engineering Technical Practice (ETP) BP GIS 06-403. This Guidance on Practice (GP) is newly created and is not based on heritage documents from the merged BP companies. Copyright © 2007, BP Group. All rights reserved. The information contained in this document is subject to the terms and conditions of the agreement or contract under which the document was supplied to the recipient’s organization. None of the information contained in this document shall be disclosed outside the recipient’s own organization without the prior written permission of BP Group, unless the terms of such agreement or contract expressly allow.