反渗透系统统故障诊断.pptVIP

HYDECanME 反渗透系统故障诊断 (Troubleshooting for RO System) 此京海德能科故有限公司  HYDECanME 反渗透系统性能下降的依据 (Evidence of Performance Decline for RO System ◆标准化压差上升15% Normalized DP (Differential Pressure)increased 15% ◆标准化产水量降低10% Normalized permeate flow decreased 10% ◆标准化透盐率增加5% Normalized salt passage increased 5%  HYDECanME 反滲透系统性能标准化的重要性 The Importance of Normalization) 膜系统真实性能反映的需要 CATRON-2 er20p( Demand of actual performance for RO system) 99.50 标准化之后脱盐率变化平稳 9900 哥辅 CATRON-2 ver 2.02 日期 标准化之前脱盐率变化显著 日期  HYDECanME 影响反渗透性能的因素 (Factor Affecting RO Performance) ◆温度 (temperature) ◆压力( pressure) ◆回收率( recovery 进水含盐量( feed water concentration) ◆pH值 ◆污染( fouling ◆结垢( scaling) ◆膜劣化( degradation of membrane)  HYDECanME 操作条件对反滲透性能的影响 Performance VS Operating Conditions) Permeate Permeate Flux Rejection Flu UX Rejection Pressure Temperature Permeate Salt Permeate Salt Rejection Flu Feed concentration  HYDECanME 膜性能变化与故障宏观表现之间的关系 Relationship Between Membrane Performance and Troubl 脱盐率 分离层电荷强弱 Salt Rejection (The strength of PA layer charge) 水通量 产水流道是否堵塞 (Permeate Flux) (The permeate channel spacer is unblocked or not) 压降 给水流道是否堵塞 DP) (The feed channel spacer is unblocked or not) 给水压力 给水、产水流道是否堵塞 (Feed Pressure) (Feed and permeate channel spacer are unblocked or not)  HYDECanME 反渗透系统故障症状及原因 (Symptoms, Causes for RO System Troubleshooting) 透盐率 Salt Rejection Passage 增加 正常 下降 ncrease Normal D ecrease 温度升高 微生物污染 有机物污染 Oxidation Temperature up Biological fouling Organics fouling 结垢 胶体污染 微粒污染 温度下降 Scaling Colloidal fouling Particulate fouling Temperature down O型圈泄漏 连接泄漏 oring leak Coupling leak 背压 物理损伤 Back pressure Physical injure 产水管泄漏 Permeate tube leak  HYDECanME 反渗透系统故障症状及原因 (Symptoms, Causes for RO System Troubleshooting) 产水通量 Permeate Flux 下降 正常 增加 Decrease Normal Increase 结垢 温度下降 氧化 温度升高 Scaling Temperature down Oxidation Temperature up 氧化物污染 胶体污染 产水管破损 OXid