康吉森自动化技术交流.pdfVIP

康吉森自动化技术交流 介绍人: 高生军 介绍人: 高生军 主 要 内 容 一. TRICON产品新技术应用 二. SIL3 安全仪表回路设计考虑 三. 新应用探讨- HIPS/EDP 四. 复杂机组解耦控制技术 技术部 高生军 一. TRICON 产品新技术应用 时钟同步 系统间PEER TO PEER 硬点或软点触发 GPS SNTP AMS资产管理 OPC通信 Modbus TCP/IP 其它: OVD,STUCK ON TEST,LOOP SUPERVISER, NEW TCM FF-SIS 二. SIL3 安全仪表回路设计考虑 相关安全概念及理论依据 TUV 安全停车时间及停车逻辑设计 PST 及SIS系统响应时间要求 提高SIS系统安全性和可用性的简单方法举例 其它设计考虑 Protective Layers Fire Gas SIS Alarms Process Control Process Plant What is a Safety Instrument System? “A system designed to respond to conditions in the plant which may be hazardous in themselves or, if no action was taken, could eventually give rise to a hazard, and to generate the correct outputs to mitigate the hazardous consequences or prevent the hazard.” Source - Health and Safety Executive (HSE), 1987. Safety Related Function Sensor E / E / PES Actuator 40% 5% 55% Typical % share of Failure Rates or Probability of Fail to Danger Two Appraisement Index for Safety System PFDavg( Failure Rate)—Can’t refuse action Availability—Can’t false action IEC SAFETY INTEGRITY LEVELS TARGET FAILURE MEASURES SAFETY DEMAND MODE CONTINUOUS/ HIGH INTEGRITY OF OPERATION DEMAND MODE OF LEVEL (Probability of failure OPERATION to perform its design (Probability of a function on demand) dangerous failure PFDavg per hour) 4 = 10-5