康隆高压混合头介绍.pptVIP

High Pressure Mixing Head LN Mixing Head/STRAIGHT Shape o LN5 /LN10/LN14/LN18/ LN30 r FPL Mixing Head/L Shape FPL7/FPL10/FPL14/FPL18/ FPL24/FPL32 r FP2L Mixing Head FP2L14/FP2L22/ FP2L32 r TRIO Mixing Head/ STRAIGHT 3 Component o TRIO7 (for Cavity Filling) TRIO14/TRIO24(for Filled material, RIM) r AX Mixing Head/ Multi Component Heads A×18/A×24  LN Mixing Head r Description r Cheaper and Simple Application with No Splah Problem r For material easy to mix r Tipical Application: Insulation Panel LN Mixing Head Size LN5 LNIO L14 LNI8 LN30  LN Flow Rate Total Cor outp N10 Min Recommended Sing le Component output Comp A Comp B Comp AComp BComp A Comp B Comp A Comp B Max 140 3505508508501000200027504500 Recommended 140 900 1700 3000 7250 (k)All values are calculated in cc/sec considering components viscosity 1000 cps.  FPL Mixing Head  FPL FloW Rate Total Component output Single Component output* FPLIO FPL14 FPLI8 FPL24 FPL32 FP2L14 FP2L22 300 150 Recommend 4007001850 300 (total output Max 260 600 1100 250 350 600 8o0 Recommend (AlI values are calculated in cc/sec, considering components viscosity 1000 cps.  TRIO Mixing Head r TRIO Mixing Head o TRIO7 (for Cavity Filling o TRIO14/TRIO24 (for Filled material, RIM)  TRIO Flow Rate TRIO7 TRIO14 TRIO24 1740 Recommende Max Recommended (All values are calculated in cc/sec, considering components viscosity 1000 cps.  Laminar flow r Install Oil accumulator block valves Near the head Reduce Temperature of the Component (viscosity) r Regulate Stroke Adjuster to reduce the Turbolence r If Possible Reduce Mixing pressure(for insulation application 120 bar r Check Right Size of Injectors r Reduce distance between Extention and Foaming Plane(Tipical on Door Application on Drum Unit Apply a water cooling on extention(Bosch Germany) FPL24 with Laminar Flow of 800 CC/sec  Wearing of the Self Cleaning Piston Appear Normally in Insulation Field with n