外文翻译基于构架构件复用的开放式数控系统研究.docVIP

A research on open CNC system based on architecture/component software reuse technology Li Bin*, Zhou Yun-fei, Tang Xiao-qi National Research Center of NC System Engineering Technology, Huazhong University of Science Technology, 430074 Wuhan City, PR China Received 12 February 2003; received in revised form 25 October 2003; accepted 25 October 2003 Available online 9 June 2004 Abstract By analyzing the current development situation of open computer numerical control (CNC) system and architecture/component software reuse technology, this paper researches on open CNC system based on this technology. Adopting domain engineering method, a CNC system is always organized with its data communication, which plays a role of key link. Furthermore, from which the reusable architecture of an open CNC system is extracted. Also the architecture is instanced to reusable data communication components, which differs from general architecture. The facet modal sorting, expression, storage and retrieval of CNC system components are introduced. Combined with all useful information as above, the integrated development platform of open CNC system is constructed. Supported by this platform, the workflow of developing open CNC systems includes two correlated courses: the development of reusable CNC components, and the construction of an application system with these reusable components. Furthermore, the real-time capability of a CNC application system on MS-Windows can be tested by this platform. Keywords: CNC; Open architecture; Component; Software reuse; Domain engineering 1. Introduction Owing to the double-quick development of hardware technology, the enhancement of computer numerical control (CNC) system’s complexity, the increase of the compatible requests with third party software, the frequent job-hopping of developer, and the cut-throat competition among craft brothers, the CNC system manufacturers are compelled to do their best to continually improve their system’s quality and s