catia装配有限元分析training.ppt

Generative Part Structural Analysis;Objectives of the course In this course you will learn how to perform Static and Modal Analyses (create analysis documents, compute and visualize) on a single Part. Targeted audience CATIA V5 Users Prerequisites Mechanical Design Fundamentals in CATIAV5;Table of Contents (1/2);Table of Contents (2/2);In this lesson, you will learn about the Generative Part Structural Analysis Workbench by : Accessing The Workbench User Interface User Settings;1.1. Accessing the Workbench;1.2. User Interface - Toolbars;User Interface - Icons;Analysis Tree;This enables you to faster access the analysis workbench.;In Part Design Workbench, customize Render Style by adding material visualization. This will also enable you to view analysis images in average-iso visualization mode. We will activate Materials so that material render styles are displayed;This enhances the visualization of selected faces. ;User Settings - Show / No Show Visualization ;In this lesson, you will learn how to create a new Analysis Document, how to save it and how to define Restraints and Loads on a Part. Create a New Analysis Document Save Analysis Documents Define Restraints Define Loads Advanced Pre-Processing Tools;General Process for a Static Analysis;A Material must be applied to the studied Part. This can only be peformed in the Part Design Workbench.;New Analysis Documents, entitled CATAnalysis files, can be created in various ways. ;Here is how to create a new Analysis Document using the Start menu.;There are various ways to save an Analysis Document and its parent documents. It is important to achieve this correctly with an assembly analysis document, for the assembly has to be properly linked with all the parts it is made from. Only those documents that have been modified will be saved or proposed for the saving.;Save Management… is an easy way to save all modified documents under user-specified names.;“Send To” is an easy way to save all linked