吉利汽车水性漆设计方案.docxVIP

吉利美日项目 水性漆工艺参数及设备设计方案 2008.2 第一部分：吉利公司提供的涂料厂家的水性漆资料 BASF公司（上海） 水性漆的存储环境要求(+5C to +30 C) 1、 During win ter and summer cooli ng or heati ng is n ecessary duri ng tran sport. 2、 It is n ecessary that lorries or other tran sport. vehicles are equipped with temperature regulati on. 3、 Storage and paint mix ing rooms should be air con diti on ed. 建议使用的施工参数 涂料 冰性） 喷房环境 挥发 烘烤条件 工作窗口 可调整范围 空气流速 时间 空气流速 Water borne 23 ± 2 C 20-28 C 0.3-0.5m/s 另mi n 0.3-0.5m/s 8min to 60 C primer 65%± 5% 55%-75% + 5min to160 C +20 min 160 C object Water borne 23 ± 1 C 20-28 C 0.3-0.5m/s 羽.5min 0.3-0.5m/s Force flash off Basecoat 65%± 5% 55%-75% a.1.5min in frared Matallics 2000m3/h.m b.2.5min hotair Solids 23 ± 1 C 20-28 C 0.3-0.5m/s 4-5min 0.3-0.5m/s 2000m3/h.m 65%± 5% 55%-75% Air tempature:60-80 C Air humidity:10g H 20/kg air c. 1.5min cooli ng 4000m 3/h.m Air tempature:20-25 C Clearcoat(1k) 23 ± 1 C 20-28 C 0.3-0.5m/s 另mi n 0.3-0.5m/s 20 min 140 C object 60%-75% 50%-75% Clearcoat(1k) 23 ± 1 C 20-28 C 0.3-0.5m/s 6 ± 1min 0.3-0.5m/s 15 min 140 C object 60%-75% 50%-75% 、PPG公司 Basecoat Heated Flash ? Goal is to achieve “ Wet film BC solids ” of 85-92% going into clearcoat zone ? Minimum 1-2 minu tes ambie nt flash in booth after spray ? Typically 3-5 mi nutes at 70-90oC PPG WB Basecoat/ Clear Operat ing Requireme nts ? Primer Body Temp. before BC Applicati on —35C Booth Temp RH - 24oC ± 1o 65% ± 5% Paint Supply Temperature -23-25 oC Bake Win dow Clear Bake 140oC @ 20 min ? BC Heated Flash-Off Requireme nts —3 min 70C (total 5 min-w/heat up) ? Film Build Requireme nts met/mica 12-18 (,CC HTC 45 □土 5卩 Waterborne Product In formatio n ? Application Volume Solids -18% to 23% ? Applicatio n Weight Solids -20% to 25% ? Applicatio n VOC -108 to 152 g/L ? Film Build Metallic 15-18 micro ns Solid White 20-25 micro ns Water Borne Primer Surfacer ? Appeara nee: Best in Class LW, SW and Filli ng Properties ? Chip: Meets Highest Releva nt Market Dema nd ? Robust ness: To Process Needs Manufacture; Bake; Sp