lammps模拟实例详解.pdfVIP

# Big colloid particles and small LJ particles units lj This command sets the style of units used for a simulation. It determines the units of all quantities specified in the input script and data file, as well as quantities output to the screen, log file, and dump files. Typically, this command is used at the very beginning of an input script. 这个指令设定模 拟的格式，它决定了在输入脚本文件和数据文件以及在屏幕上显示的输 出物，日志文件和垃圾文件中所有的单元格式。典型的是，它经常用于 输入脚本的开头 For style lj, all quantities are unitless. Without loss of generality, LAMMPS sets the fundamental quantities mass, sigma, epsilon, and the Boltzmann constant 1. The masses, distances, energies you specify are multiples of these fundamental values. The formulas relating the reduced or unitless quantity (with an asterisk) to the same quantity with units is also given. Thus you can use the mass sigma epsilon values for a specific material and convert the results from a unitless LJ simulation into physical quantities. 对于lj 格式，所有数量都是无量纲的。不失一般性的，lammps设定了基 本量 质量 sigma epsilon 和波尔兹曼常数 1。你定义的 质量，距离，能 量 是这些基本值的倍数。公式把衰减量或者是无量纲量 （用*）和单元 给出的相同的量关联起来。因此你可以用mass，sigma，epsilon值表示 一个具体材料并且改变一个无量纲lj 模拟的物理量的结果。 mass mass or m distance sigma, where x* x / sigma time tau, where tau t* t (epsilon / m / sigma^2)^ 1/2 energy epsilon, where E* E / epsilon velocity sigma/tau, where v* v tau / sigma force epsilon/sigma, where f* f sigma / epsilon torque epsilon, where t* t / epsilon temperature reduced LJ temperature, where T* T Kb / epsilon pressure reduced LJ pressure, where P* P sigma^3 / epsilon dynamic viscosity reduced LJ viscosity, where eta* eta sigma^3 / epsilon / tau charge reduced LJ charge, where q* q / (4 pi perm0 sigma epsilon)^ 1/2 dipole reduced LJ dipole, moment where *mu mu / (4 pi perm0 sigma^3 epsilon)^ 1/2 electric field force/charge, where E* E (