基于单片机的led路灯时控光控模拟系统设计.docxVIP

基于单片机的 LED 路灯时控光控模拟系统设计 原理图中的滑动变阻器实际使用光敏电阻。 程序如下 #includereg52.h #define uchar unsigned char #define uint unsigned int sbit key_0=P2A3; sbit key_仁卩2人2; sbit key_2=P2A1; sbit key_3=P2A0; sbit wela_0=P2A7; sbit wela_1=P2A6; sbit wela_2=P2A5; sbit wela_3=P2A4; sbit ludeng=P1A0; sbit inlamp1=P1A2; sbit inlamp2=P1A4; sbit guangmin=P1A6; uchar code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; unsigned int hour,min,STH,STM,LH,LM,f1,f0; uint aa; void delay(uint u) //延时子程序 { uint x,y ; for(x=u;x0;x --) for(y=110;y0;y --); } void display(uchar h,uchar m) //动态扫描子程序，扫描周期为 50ms { uchar hhou