YDG0070E1 61 LaunchPad for QDAS guide CHS-标准资料文件.pdf

Camio 4.6 Reliable and Innovative Metrology Solutions 用户手册 COPYRIGHT Metris NV and Metris UK Ltd. retain ownership rights to the Camio Studio-Inspect software program and sub-programs (herein referred to as the ‘software’) and its associated documentation. The software source code is a confidential trade secret of METRIS. You may not attempt to decipher or decompile the software or develop source code for the software, or knowingly allow others to do so. Information necessary to allow operation of the software with other programs may be available from METRIS upon request. METRIS software and associated documentation may not be sub-licensed and may not be transferred to another party without the prior written consent of METRIS. Only you and your employees and consultants who have agreed to the above restrictions may use the software, and only on the authorised equipment. Your right to copy this software and associated documentation is limited by copyright law. Making copies, adaptations, or compilation works (except a single copy of the software for archival purposes or as an essential step in the utilisation of the software in conjunction with the supplied equipment), without prior written authorisation of METRIS, is prohibited by law and constitutes a punishable violation of the law. METRIS provides this publication ‘AS IS’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall Metris NV and Metris UK Ltd. or any of their associates be liable for any loss of profits, loss of business, loss of use or data, interruption of business, or for indirect, special, incidental, or consequential damages of any kind, even if METRIS has been advised of the possibility of such damages arising from any defect or error i