片式散热器英文说明.docxVIP

PAGE PAGE # PAGE PAGE # 片式散热器使用说明 OPPRATION INSTRU CTION TO GILLED RADIATOR 1.Gnerallnstruction The gilled radiator produced by us is a sort of radiating unit of high efficiency with the special-purpose for transformer .It can bear an oil pressure high as 0.15MPa,and along the straits of vacuum pumping and comparatively saving oil to others of its line .Welded with the high quality ST13 cold - rolled plate of 1mm thickness ,the oil channel of the gilled radiator comes up to a depth of 10mm ,and the inner cavity formed after the welding serves as the passage of the gilled radiator comes up to depth of 10mm,and the inner cavity formed after the welding serves as the passage of oil circulation for the transformer ,radiating heat outside via the steel plate .The adoption of outside weld ＆ of nitrogen protection at welding have reduced spattering bead, for the guarantee of cleanness of the gill-cavity and the manifold ,and as well lessened the oil box of oil flow ,The detachable gilled radiator is linked to the adapting flange to the valve of union coupling attached to the oil box of the transformer .So it can be packaged and transported separately, decreasing the volume at transport accordingly. In transporting ,the gilled radiator allows inside roughly standard atmospheric pressure of nitrogen gas for the purpose of rust prevention .Moreover after a certain period of performance ,the detachable gilled radiator can be removed from the valve of union joint for inspection, which is quite convenient to handle promoting application of the detachable gilled radiator correspondingly 2.installation In unpacking installing on site, it is required of caution not to scratch the lacquer film or clash the detachable gilled radiator, if the lacquer film is scratched, it should be mended with lacquer in time; if the radiator is damaged, it should be taken with repair welding and further mended with lacquer at the patch weld. In installing of the detachable gilled radiator