机务维修培训 IBS_iFlightMRO_CSN_HLD_Default_Part_for_Inventory_Generation_Item2.docVIP

REF DOC_SUBJECT High Level Design Ashwin J Status: Valid Page PAGE 7 of NUMPAGES 10 Copyright ? DATE \@ yyyy 2013 by IBS Technics, Inc. SET Project FILLIN Project Name iFlight MRO iFlight MRO REF Project iFlight MRO Default Part for Inventory Generation AMS-60626 SET DOC_SUBJECT FILLIN Subject (e.g. Framework PMP) High Level Design High Level Design REF DOC_SUBJECT High Level Design Version : 0.2 Date : 12/9/2013 Status : Valid Author : Ashwin J File : IBS_iFlightMRO_CSN_HLD_Default_Part_for_Inventory_Generation_Item2.doc Pages : 10 Classification : Confidential Distribution : IBS,CSN History Version Date Author Remark 0.1 09-Sep-2013 Ashwin J Draft 0.2 12-Sep-2013 Ashwin J Incorporated review comments from Anish and Shijil Table of Contents TOC \o 1-6 \h \z \u 1 Introduction 4 1.1 Purpose 4 1.2 Scope 4 1.3 Definitions, Acronyms and Abbreviations 4 2 High Level Design 4 2.1 Statement of Requirement 4 2.2 Assumptions 4 2.3 Features 4 3 Functional Flow Implications and Changes 5 3.1 Fitted Part Details 5 3.1.1 Field Definition 6 3.1.2 Business Rules 6 3.2 Aircraft Master Configuration – FIN/Reference 8 3.2.1 Field Definition 9 3.2.2 Business Rules 9 4 Signature 10 Introduction Purpose The purpose of this document is to collect, analyze and define the requirement for the functionality to define the part to be defaulted for every hole in the inventory generation process. Scope This document defines the complete deliverable and supersedes all previous written and oral communications. This feature will be available in iFlight MRO 4.3.0.0 or then current version. Definitions, Acronyms and Abbreviations None High Level Design Statement of Requirement CSN requires a functionality to define the part to be defaulted for each hole in the inventory generation process thereby reducing the user’s time in selecting parts for each hole. Assumptions N