硅橡胶密封剂rtv60.docxVIP

RTV 60 RTV 60 Silicone Rubber Compounds for High Temperature Product Description RTV60 silicone rubber compound is high temperature two-part silicone elastomers. It is supplied ready-to-use with a base compound and DBT (dibutyl tin dilaurate) as the standard curing agent. DBT is suitable for most applications, however other catalysts are available to facilitate deep section cure, faster cure and automated mixing. Key Performance Properties  Variable work times and cure rates by adjusting the amount and type of curing agent Room temperature cure Composition free of solvents and solvent odour Excellent adhesion capabilities with primer Excellent release properties Retention of elastomeric properties at temperatures from minus 54°C up to 260°C continuously, and up to 316°C for short periods of time Applications Typical high temperature applications for these products include, but are not limited to: Potting and encapsulating electric motors and transformers Fabrication of rubber parts Casting moulds for low-melting point metals Release applications such as rubber rollers Thermal insulation 1 Typical Product Data UNCURED PROPERTIES OF RTV BASE OMPOUNDS Colour Consistency Viscosity, cps Specific Gravity UNCURED PROPERTIES OF RTV BASE WITH 0.5% DBT CURING AGENT ADDED  RTV 60 Red Pourable 47,000 1.48 RTV 60 Work Time @ 25C, hrs Cure Time @ 25C, hrs CURED PROPERTIES (0.5 wt. % DBT Curing Agent added, cured 7 days at 25C and 50% R.H.) Mechanical  2 24 RTV 60 Hardness, Shore A Durometer 57 Tensile Strength, kg/cm2 70 Elongation, % 120 Tear Strength, kg/cm 7 Shrinkage, % 0.6 Electrical Dielectric Strength, KV/mm (v/mil) (1.9 mm thick) 17.7 (450) Dielectric Constant @ 1000 Hz 4 Dissipation Factor @ 1000 Hz 0.02 Volume Resistivity, ohm-cm 4.4 x 1014 Typical Product Data Thermal Useful Temperature Range,° C -54 to 260 Thermal Conductivity, gm-cal/sec, cm2, ° C/cm 0.00074 Coefficient of Expansion, cm/cm, ° C 20 x 10-5 Specific Heat, cal/gm, ° C F 0.35 2 Instructions for Use M