04变频器说明书大全4变频器说明书大全4 uni_regen.pdf

Installation Guide Unidrive Regen Part Number: 0460-0026 Issue Number: 1 Safety Information Persons supervising and performing the electrical installation or maintenance of a Drive and/or an external Option Unit must be suitably qualified and competent in these duties. They should be given the opportunity to study and if necessary to discuss this Installation Guide before work is started. The voltages present in the Drive and external Option Units are capable of inflicting a severe electric shock and may be lethal. The Stop function of the Drive does not remove dangerous voltages from the terminals of the Drive and external Option Unit. Mains supplies should be removed before any servicing work is performed. The installation instructions should be adhered to. Any questions or doubt should be referred to the supplier of the equipment. It is the responsibility of the owner or user to ensure that the installation of the Drive and external Option Unit, and the way in which they are operated and main ned complies with the requirements of the Health and Safety at Work Act in the United King and applicable legislation and regulations and codes of practice in the UK or elsewhere. The Drive software may incorporate an optional Auto-start facility. In order to prevent the risk of injury to personnel working on or near the motor or its driven equipment and to prevent potential damage to equipment, users and operators, all necessary precautions must be taken if operating the Drive in this mode. The Stop and Start inputs of the Drive should not be relied