西门子系统手册441 Getting Started.pdfVIP

This Guide uses a real-life example to take you through the five steps for setting up a fully functional application that will enable you to transfer data via the serial interface and to familiarize yourself with and test the basic hardware and software features of your CP 441 The cross-references tell you where to find more detailed information on specific topics in the operating manual. It will take you between one and two hours to work your way through the example, depending on your prior experience. Preconditions These are the preconditions for this example: You have an S7-400 station, consisting of rack, power supply module, and CPU. STEP 7 ( V5.0) is correctly installed on your programming device. You have configured a project for the S7-400 station. The programming device is connected to the CPU. You have a CP 441-1 or CP 441-2 module complete with the appropriate configuration package, an interface submodule and connecting cable. You have prepared your connection partner for serial data transfer. If you are using a CP 441 with RS232/V.24 interface, your programming device running the “Hyper Terminal” program can func- tion as the connection partner. You will find “Hyper Terminal” in Windows under Start→Programs → Accessories → Hyper Terminal. The procedure for starting the program is described below. Installing the Configuration Package on your Programming Device The configuration package consists of a parameterization tool for the CP 441, a library containing function blocks, and a demo program. Start the installation program on the CD by double-clicking the file called SETUP.EXE. Follow the instructions issued by the installation program. Installing the CP 441, Connecting to the Communication