ASME BPVC-section Ⅱ C篇 焊条、焊丝及填充金属SFA5.14 -2019英文版.pdf

ASME BPVC.II.C-2019 SFA-5.14/SFA-5.14M SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODE SAND ROD ð19Þ SFA-5.14/SFA-5.14M (Identical with AWS Specification A5.14/A5.14M:2018. In case of dispute, the original AWS text applies.) 413 SFA-5.14/SFA-5.14M ASME BPVC.II.C-2019 Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods 1. Scope 1.1 This specification prescribes requirements for the classification of bare nickel and nickel-alloy welding electrodes, strip electrodes, and welding rods. It includes those compositions where the nickel content exceeds that of any other element. 1.2 This specification makes use of both U.S. Customary Units and the International System of Units (SI). The measure- ments are not exact equivalents; therefore, each system must be used independently of the other without combining in any way when referring to material properties. The specification with the designation A5.14 uses U.S. Customary Units. The specification A5.14M uses SI Units. The latter are shown within brackets ([ ]) or in appropriate columns in tables and figures. Standard dimensions based on either system may be used for sizing of filler metal or packaging or both under A5.14 or A5.14M specifications. 1.3 Safety and health issues and concerns are beyond the scope of this standard; some safety and health information is provided, but such issues are not fully addressed herein. Some safety and health information can be found in Annex Clauses A5 and A10. Safety and Health information is available from the following sources: American Welding Society: (1) ANSI Z49.1, Safety in Weldi