教材~SMT不良圖片.pptVIP

  • 254
  • 0
  • 约1.06千字
  • 约 24页
  • 2021-04-03 发布于黑龙江
  • 举报
* 綠漆覆蓋不良 PCB噴錫氧化 PCB氣泡 貫穿孔冒錫 側立 R0603 solder defect: crack Due to low temperature of the reflow process, the ball is not completely molten. During the first thermal stress the joint fails at the connecting point of the paste and the ball. Increasing the speed of the reflow system to increase the throughput will end up in to cold solder joints, if the thermal profile is not taken into consideration and adapted. solder defect: low temperature solder defect: tombstone / manhattan wrong placement (longitutional misalignment) The ratio A/B effects the surface tension force Fs which is

文档评论(0)

1亿VIP精品文档

相关文档