西门子培训教程、手册合集5 wincc flexible 2005-gettingstarted options.pdf

SIMATIC HMI  WinCC flexible 2005 Getting Started Options     Order number 6ZB5370-1CN02-0BA0 Release 05/2005 A5 Safety Guidelines This manual con ns notices which you should observe to ensure your own persona fety as well as to oid property damage. The notices referring to your persona fety a ighlighted in the manual by a safety alert symbol, notices referring to property damage only h e no safety alert symbol. Danger indicates an imminently hazardous situation which, if not oided, will result in death or serious injury. Warning indicates a potentially hazardous situation which, if not oided, could result in death or serious injury. Caution used with the safety alert symbol indicates a potentially hazardous situation which, if not oided, may result in minor or moderate injury. Caution used without safety alert symbol indicates a potentially hazardous situation which, if not oided, may result in property damage. Notice used without the safety alert symbol indicates a potential situation which, if not oided, may result in an undesirable result or state. Wehn several danger leve pply, the notices of the highest level (lower number) are always displayed. If a notice refers to personal damages with the safety alert symbol, then another notice may be added warning of property damage. Qualified Personnel The device/system may only be set up and operated in conjunction with this documentation. Only qualified personnel should be allowed to install and work on the equipment. Qualified persons are defined as persons who are authorized to commi