文本新建microsoft powerpoint演示文稿.pptxVIP

Metal Injection Molding(MIM);Metal Injection Molding;1.mixing;Feedstock preparation?- The first step is to create a powder mixture of metal and polymer. The powder metals used here are much finer (typically under 20 microns) than those used in traditional powder metallurgy processes. The powder metal is mixed with a hot thermoplastic binder, cooled, and then granulated into a homogenous feedstock in the form of pellets. The resulting feedstock is typically 60% metal and 40% polymer by volume.?;2.forming;Injection molding?- The powder feedstock is molded using the same equipment and tooling tha