ECER21关于就内饰件装置批准车辆的统一规定.pdf

目录 1. SCOPE 29 1. 范围 29 2. DEFINITIONS 30 2. 定义 30 3. APPLICATION FOR APPROVAL 32 3. 认证申请 32 4．APPROVAL 33 4. 认证 33 5．REQUIREMENTS 35 5. 要求特性 35 6．MODIFICATIONS AND EXTENSION OF APPRA VAL OF THE VEHICLE TYPE45 6. 车辆认证及修改 45 7．CONFORMUTY OF PRODUCTION 45 7. 产品一致性 45 8．PENALTIES FOR NON-CONFORMTTY OF PRODUCTION 46 8.不一致产品处罚 46 9．PRODUCTION DEFTNITELY DISCONTINUED 46 9.产品明确废止 46 10．NAMES AND ADDRESSES OF TECHNICAL SERVICES CONDUCTING APPROVAL TESTS ，AND OF ADMINISTRATIVE DEPARTMENTS 47 10 认证测试技术服务机构名称、地址以及主管部门 47 EXPLANATORY NOTES 48 条款注释 48 ANNEX 1 DETERMINATION OF THE HEAD-IMPACT ZONE 60 附件 1 头部碰撞区及基准区的确定 60 附件 2 信息 62 ANNEX 3 ARRANGEMENTS OF APPROV AL MARKS64 附件 3 认证码布置 64 ANNEX 4 PROCEDURE FOR TESTING ENERGY-DISSIPATING MATERIALS 65 附件 4 吸能材料检验程序 65 ANNEX 5 PROCEDURE FOR DETERMINING THE "H" POINT AND THE ACTUAL ．TORSO ANGLE FOR SEATING POSITIONS IN MOTOR VEHICLES .. 69 附件 5 乘坐位置 H 点和实际靠背角的确定程序 69 ANNEX 5-APPENDIX 1 DESCRIPTION OF THE THREE-DIMENSIONAL"H" POINT MACHINE* (3-D H MACHINE) 81 附件 5- 附录 1 三维 H 点装置的描述（三维 H 点装置） 81 附件 5- 附录 2 84 三维坐标系 84 ANNEX 5-APPENDIX 3 REFERENCE DATA CONCERNING SEATING POSITIONS85 附件 5- 附录 3 关于乘坐位置的基准数据 85 ANNEX 6 METHOD OF MEASURING PROJECTIONS 87 附件 6 凸出物测量方法 87 附件 7 APPARATUS AND PROCEDURE FOR APPLICATION OF PARAGRAPH 5.2.1. OF THIS REGULATION 91 附件 7 本规则第 5.2.1 节中所运用的装置和方法 91 ANNEX 8 DETERMINATION OF A DYNAMICALLY DETERM