船舶主机、副机拐档差测量记录报表.docxVIP

主机、副机拐挡差测量记录报表 Record Report of Crankshaft Deflection Measurement of Main Engine and Auxiliary Engine 编号：100103-3 No.100103-3 船 名 MV __________机拐档测量记录 ___________ crankshaft deflection measurement record 测量日期 Measurement Date 机 型 Engine Model 航次 Voyage 机舱位置 Position of the E/R 地点 Place 需要调整拐档差极限： （此极限时拐档需调整） 下死点 BDC Limit of crankshaft deflection needed to be adjusted: (At this limit, crankshaft deflection needs to be adjusted)拐档差极限： （此极限时机器不能使用） Limit of crankshaft deflection: (The machine cannot be used at this limit) e a 活塞行程： Piston stroke: 左 d b 右 A+E 2正车或倒车测量： A+E 2 上下死点拐档差的计算公式：（按拐档表所在位置记录时） C - c Calculation formula of crankshaft deflection at TDC and BDC positions :( Recorded at the position of crankshaft deflection gauge) 公式没有复制 拐档表读数之正负 The positive and negative readings of the crankshaft deflection 上死点 TDC （按拐档差所在位置记录） (Recorded at the position of crankshaft deflection gauge) 货舱Hold 1 2 3 4 5 6 共计 载重 Load 吃水Draft 船首： 船中： 船尾： Fore: Middle: Aft: 拐档差曲线表 Curve table of crankshaft deflection +0.100 +0.10 0 +0.20 +0.30 -0.10 -0.20 -0.30 气缸编号 Cyl. No. 1 2 3 4 5 6 拐档差crankshaft deflection 气缸编号 Cyl. No. 7 8 9 10 11 12 拐档差 crankshaft deflection 测量人（签字）： 轮机长（签字）： Measurer (signature) : Chief Engineer (signature) : 备注：此表一式二份，一份报机务主管，一份轮机长存。 Note: This form is in duplicate, one copy shall be kept by Chief Engineer and the other by the Technical Department.