信号波形产生与滤波电路设计要点.pdf

模电课程设计报告 课题名称：信号波形的产生与滤波电路 专业班级： ******* 学生姓名： ** 学生学号： ********** 指导教师：韩焱青 设计时间： 2012 年 6 月 13 日 - 1 - 摘要 方波信号是一种应用极为广泛的信号，它在科学研究、工程教育及生产实践中的 使用也非常普遍。 它通常作为标准信号， 应用于电子电路的性能试验或参数测量。 另外， 在许多测试仪中也需要标准的方波信号检测一些物理量。 方波产生电路可以由迟滞比较 器和 R、C 基本回路构成，也可以由 555 定时器加一些电阻、电容组成外围电路构成。 滤波电路也在电子电路中也有较大的应用，例如人们往往要得到某种特定频率的 信号，而实际输入的包含有各种频率的信号，这时就要用到与之相对应的滤波电路滤去 不需要频率的信号，而保留人们想要频率的信号。构成滤波电路的有低通滤波、高通滤 波及带通滤波电路， 本设计是基于二阶带通滤波电路的一个中心频率为 10KHZ的滤波电 路。 关键字 : 二阶无线增益带通滤波电路；中心频率；迟滞比较器； Abstract Square wave signal is a kind of application of the signal, it is widely in scientific research, engineering education and the use of the production practice and is very popular. It is usually used as standard signal, used in electronic circuit performance test or parameter measurement. In addition, in many tester are required in the standard square wave signal detection some physical quantities. Produced by square wave circuit can hysteresit comparator and R C, basic circuit structure, by 555 the timer add some resistance, capacitance of a peripheral device. Filter circuit is also in electronic circuits also have larger applications, such as people tend to get a specific frequency of the signal, but the actual input contains various frequency signal, would then use with the corresponding filter circuit to filter the frequency of the signal dont need and keep that people want to frequency signal. Constitute the filter circuit with low pass filter high-pass filter, and bandpass filter circuit, the design is based on second-order band-pass filter circuit of a center frequency for 10 KHZ filter circuit. Key words: Second order wireless gain bandpass filters circuit;Center frequen