创成式外形设计、曲面优化、展开外形和BiW模板.pdfVIP

Entering the Generative Shape Design Workbench This first task shows you how to enter the Generative Shape Design workbench and open a wireframe design part. Before starting this scenario, you should be familiar with the basic commands common to all workbenches. These are described in the Infrastructure Users Guide. 1. Select Shape - Generative Shape Design from the Start menu. The Shape Design workbench is displayed. The New Part name dialog box may appear depending on the way you customized your session. It provides a field for entering the name you wish to assign to the part, an option that enables hybrid design an two other options to insert a geometrical set and/or an ordered geometrical set in the part to be created. If you select Enable hybrid design , the capability then applies to all the bodies you will create in your CATIA session (and not only to the new CATPart document you are opening). Consequently, if your session contains CATPart documents already including traditional bodies, the new bodies you will create subsequently in these documents will possibly include wireframe and surface elements. To facilitate your design, It is therefore recommended that you do not change this setting during your session. For more information, refer to the Part Document chapter in Customizing section of the Part Design documentation. 2. Select File - Open and navigate to