DNVGL-CP-0352正版国际标准规范.pdfVIP

CLASS PROGRAMME Approval of manufacturers DNVGL-CP-0352 Edition ebruary 2019 Manufacture of welded products - welding workshop The content of this service document is the subject of intellectual property rights reserved by DNV GL AS (DNV GL). The user accepts that it is prohibited by anyone else but DNV GL and/or its licensees to offer and/or perform classification, certification and/or verification services, including the issuance of certificates and/or declarations of conformity, wholly or partly, on the basis of and/or pursuant to this document whether free of charge or chargeable, without DNV GLs prior written consent. DNV GL is not responsible for the consequences arising from any use of this document by others. The electronic pdf version of this document, available free of charge from , is the officially binding version. DNV GL AS FOREWORD DNV GL class programmes contain procedural and technical requirements including acceptance criteria for obtaining and retaining certificates for objects and organisations related to classification. © DNV GL AS ebruary 2019 Any comments may be sent by e-mail to rules@ This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the users sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document. CHANGES – CURRENT t n