艾默生质量流量计.pptVIP

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Using this example of a 1” meter comparison: At 7.5 to 1 turndown from the manufacturer stated nominal flow rate, what looks like a .15% Promass F is really a .2% meter when you factor in their zero stability spec. All this is also true if you compare the 0.15% option on the F-Series with the E+H 83F, which has a base accuracy of 0.1% plus zero stability The E+H full range is actually 45 psi pressure drop compared to the MMI pressure drop of 14.5 psi. Because of this, the E+H Promass F will almost always run a