堆高车作业指导书学习1.docVIP

堆高车作业指导书学习1 堆高车作业指导书学习1 堆高车作业指导书学习1 你和我共享优异的文档 1目的：商讨该病的发病体制 为了规范安全运转和保护 对堆垛车的要求，保证其正确性 操作人员在操作过程中，以及在平时使用中 为使本条例奏效，特拟订本条例 过程中堆垛车的保护。 2合用范围： 欧洲能源堆垛机，用于库房和车间。 三。责任： 3.1. 技术部负责拟订 安全操作规程及保护要求 堆垛车； 3.2. 管理部人力资源部 负责组织本部门的操作培训 操作人员，并在经过考试后颁发“上岗证” 考试，未获得“上岗证” “岗位”人员不得操作堆垛车； 3.3. 操作人员负责安全操作和平时保护 堆垛机卡车的保护。 4操作步骤： 4.1. 操作前应先插入钥匙， 翻开电源，启动机器。 4.2. 而后用双手握住“控制手柄”并按下 降到5厘米左右，但不可以太低。 4.3. 转动“旋钮” with your finger to move forward, and the vehicle will move backward The greater the direction of rotation, the faster the speed. 4.4. when the control handle is turned to the left, the vehicle will turn to the left, turn to the right, and turn to the right. 4.5. handling of goods: 4.3.1 first adjust the fork width to meet the fork demand and safety. 4.3.2 align the fork with the neutral position of the pallet, move forward the gantry, so that the goods can be safely and stably parked on the stacking car. 4.3.3 after entering the pallet, pull the lifting handle on the fork to slowly raise the goods by about 0.5m, and then return to the gantry. 在保证货物稳固、安全、靠谱后 叉车，操作“控制手柄”使其向前挪动 或向后交货 目的地。 抵达目的地后，重复上述“门架” 挪动操作时，安全放下托盘，然退后出货叉。 堆垛机竣工后，应将堆垛机驶回原处 指定地址。 4.6. 议论： 4.6.1. 操作手柄尾端的红色大按钮是 紧迫倒车制动按钮。假如把手不当心 撞击人体，对安全运转起到必定作用 人员的作用。 5安全操作注意事项。 it is forbidden to operate after drinking and without training. 5.2. overloading and unbalanced stacking of goods are strictly prohibited. 5.3. it is forbidden to park the vehicle on the ramp or steps. 5.4. in the process of vehicle walking, the operator should slow down and work too hard in narrow passage, limited height or uneven road During and, the operator should warn other personnel to stay away from the work area. AAA quality documents you and I share 5.5. the operator shall contact with the dangerous areas (such as gantry, fork, chain, pulley, balance wheel and other parts) that may cause hands and feet to be pressed It keeps the moving parts at a reasonable distance. 5.6.operators should avoid emergency stop and fast turning, 应保证视线优异，转弯时没有阻碍。 5.7. 不同意车辆在高温、超低温