300MW机组热力系统计算与经济性分析.docVIP

摘 要 本论文首先介绍了课题研究的目的与背景，然后对论文涉及的相关的概念作了简要介绍，接着对热力系统常用的计算方法作了简要叙述，并运用热力系统常规计算方法300MW的机组原则性热力系统进行计算。本文以东方汽轮机厂生产的N300-16.7/537/537-6型汽轮机为设计本体，结合运行情况和各种参数在焓熵图的生产运行，与常规热力系统计算方法的原理，原理的机组热力系统的计算，包括计算结果的热力系统计算分析的经济指标。同时根据已知的参数和数据，在主蒸汽旁路系统和综合热系统设计与计算再热蒸汽系统，包括直径计算，管壁厚度与保温设计，具有十分重要的意义，对机组实际运行，根据制定的综合热系统图的计算进行了简要的分析设计单位的经济。 关键词：原则性热力系统，全面性热力系统，热经济性 Abstract This paper first introduced the purpose of research and background, and then on the relevant papers related to the concept.A brief introduction, followed by heat system commonly used for the calculation are briefly introduced, and the use of conventional method of calculating the thermodynamic system of units 300MW thermal system are calculated in principle. In this paper, Dongfang Steam Turbine Plant N300-16.7/537/537 -6production for the design of ontology-based steam turbine, combined with the actual running of the operation of the production data and the mapping parameter enthalpy-entropy diagram, the principle of the conventional method of calculating the thermodynamic system of The principle of the thermal unit system, the system mainly includes a heat index of economic calculation and the calculation results of the analysis. At the same time the basis of known parameters and data, the bypass of the main steam and reheat steam system and a comprehensive system design and calculation of the thermodynamic system, including the diameter, the pipe wall thickness and stress calculation also design and insulation materials insulation election type, the actual unit to run with greater significance, according to calculations to map out comprehensive plans thermodynamic system. General analysis of the design of economic units, and proposed practical measures to improve the economic unit. Key words: thermal system in principle, a comprehensive thermal systems, thermal economy