HP双机环境修改IP地址.docVIP

本机配置修改 修改hosts文件 修改/etc/hosts文件中涉及本机ip、备机ip以及浮动ip的地方进行修改 使用sam命令修改主机IP地址 Lan0 是心跳网卡,配置上心跳IP Lan1 是本机物理网卡，配置上物理IP Lan2 是备用网卡，不用配置IP地址。双机调试中必须将Lan2也接入到交换机中，否则检测不通过 修改双机配置 修改/.rhosts文件，建立双机信任关系 ah-nms-2#[/]more .rhosts ah-nms-1 root ah-nms-2 root ah-nms-1 oracle1 ah-nms-2 oracle1 修改/etc/cmcluster/AHCluster.conf文件 修改前做好备份工作 cp –R /etc/cmcluster /etc/cmcluster.bak090826 FIRST_CLUSTER_LOCK_VG /dev/vglock NODE_NAME ah-nms-1 NETWORK_INTERFACE lan0 HEARTBEAT_IP 192.168.0.1 NETWORK_INTERFACE lan1 HEARTBEAT_IP 10.234.22.21 NETWORK_INTERFACE lan2 FIRST_CLUSTER_LOCK_PV /dev/dsk/c4t0d7 NODE_NAME ah-nms-2 NETWORK_INTERFACE lan0 HEARTBEAT_IP 192.168.0.2 NETWORK_INTERFACE lan1 HEARTBEAT_IP 10.234.22.22 NETWORK_INTERFACE lan2 FIRST_CLUSTER_LOCK_PV /dev/dsk/c5t0d7 VOLUME_GROUP /dev/vgjyfx VOLUME_GROUP /dev/vglock VOLUME_GROUP /dev/vgnms VOLUME_GROUP /dev/vgovo 修改/etc/cmcluster/nmsserver下面的2个文件 1、nmsserver.conf文件修改 SUBNET 10.234.22.0 2、nmsserver.cntl文件修改 IP[0]=10.234.22.23 //修改为包的浮动ip SUBNET[0]=10.234.22.0 以上文件修改好以后，2号机器上面按照同样方法进行修改，或者使用rcp cmcp等进行拷贝。 测试修改结果 ah-nms-1#[/etc/cmcluster]cmcheckconf -C /etc/cmcluster/AHCluster.conf Begin cluster verification... Error: Run script /etc/cmcluster/nmsserver/nmsserver.cntl for package nmsserver does not have execute access on node ah-nms-1. Error: Invalid subnet 10.90.200.0 in package nmsserver Error: Run script /etc/cmcluster/ovoserver/ovoserver.cntl for package ovoserver does not have execute access on node ah-nms-1. Error: Invalid subnet 10.90.200.0 in package ovoserver Warning: No additional packages can be added to this cluster. cmcheckconf : Unable to verify cluster file: /etc/cmcluster/AHCluster.conf. 检测结果不通过，发现老的网段依然存在配置中，继续检查 ah-nms-1#[/etc/cmcluster]cmviewconf Cluster information: cluster