ASME STP-PT-074-2015喷嘴、壳体和成型封头与外部封头之间的局部应力标准.pdf

STP-PT-074 Local Stresses in Nozzles in Shells and Formed Heads from External Loads - - - ` , , ` , ` , , ` , , ` - ` - ` ` , , , ` ` ` ` , ` , ` ` ` , ` , ` , , , ` ` ` ` , ` , ` - - STP-PT-074 LOCAL STRESS IN NOZZLES, SHELLS AND FORMED HEADS FROM EXTERNAL HEADS Prepared by: Anthony W. Paulin Paulin Research Group - - - ` , , ` , ` , , ` , , ` - ` - ` ` , , , ` ` ` ` , ` , ` ` ` , ` , ` , , , ` ` ` ` , ` , ` - - Date of Issuance: June 26, 2015 This report was prepared as an account of work sponsored by ASME Pressure Technology Codes Standards and ASME Standards Technology, LLC (ASME ST-LLC). Neither ASME, ASME ST-LLC, the author, nor others involved in the preparation or review of this report, nor any of their respective employees, members or persons acting on their behalf, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe upon privately owned rights. Reference herein to any specific commercial product, process or service by trade name, trademark, manufacturer or otherwise does not necessarily constitute or imply its endorsement, recommendation or favoring by ASME ST-LLC or others involved in the preparation or review of this report, or any agency thereof. The views and opinions of the authors, contributors and reviewers of the report expressed herein do not necessarily reflect those of ASME ST-LLC or others involved in the preparation or review of this report, or any agency thereof. ASME ST-LLC does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a publication against liability for infringement of any applicable Letters Patent, nor assumes any such liability. Users of a publication are expressly advised that determination of the validi