Ricoh理光 办公型印刷系统 彩色数码复合机 MP C2004SP 用户手册18.pdf

Notes for Users This machine supports Mopria. Mopria is a standard that allows an Android device to print over a wireless network. Your Android de- vice will detect Mopria-accessible printers and MFPs automatically on the same network as the device. For more information about Mopria, please visit: /how-to-print. If no connection can be established by using the following procedure, contact your service representa- tive. „Printing with Mopria Notes on the Print Function • When performing a print job using Mopria, configure the setting so that User Authentication is not used. For details, see Configuring User Authentication in the Security Guide manual supplied with the main unit. • When printing with Mopria, multiple jobs cannot be accepted at a time. After printing a current job, proceed to print the next job. If you cannot use Mopria, check that IPP and Bonjour are enabled. [Active] is specified as the default. For details about login, see Administrator Login Method, Security Guide. Configuration Procedure for Printing using Mopria 1. Log in to Web Image Monitor as a network administrator. 2. Point to [Device Management], and then click [Configuration]. 3. Click [IPv4] in [Network]. 4. Check that [IPP] is set to [Active]. If [Active] is not selected, select it. 5. Click [OK] to proceed. 6. Click [Bonjour] in [Network]. 7. Check that either of [IPv4] or [IPv6] in [Bonjour] is set to [Active]. If [Active] is not selected, select it. 8. Click [OK]. Mopria and the Mopria logo are trademarks of Mopria Alliance, Inc. © 2016, 2017 EN GB EN US EN AU D284-7064A