飞利浦（PHILIPS）室内空气质量监测仪系列 AS3505 00 入门指南.pdf

1 2 3 4 5 6 8:08 0.02 VOC 36°C PM2.5 The formaldehyde sensor will last 24 months* in normal conditions, however due to dierent usage environments, the sensor may have a longer or shorter life. We suggest user to replace the formaldehyde sensor according to indications from appliance *24months according to Philips internal test and assessment ,test at average 1ppm equivalent Formaldehyde concentration with Ethanol. 甲醛感应插件在正常使用环境下建议使用时间为24个月*，因使用环境不同， 使用时间有可能会更长或更短。我们建议用户根据飞利浦甲醛感应插件更换 提示，适时更换。 *24个月根据飞利浦内部测试及评估得来，测试在乙醇气体中进行，平均测试 浓度等效于1PPM浓度的甲醛。 © 2016 Koninklijke Philips N.V. All rights reserved. 4241 210 88021 Note: To ensure formaldehyde sensing 1 For rst time turning on, not using it for a long time or impacted by high concentrated pollution gas, formaldehyde value might show a higher reading initially, this is normal. Place the appliance in a ventilated area until value drops to below 0.05. 2 For storage, please keep under dry and ventilated environment. 3 Please keep it away from high concentrated substances like alcohol, perfume, oil smoke, etc. If interfered by these substance and showing high value readings, place the appliance in a ventilated area to recover. 注意事项 为了保证甲醛测量准确 1 首次使用产品，长时间不用或接触高浓度污染气体后甲醛读数 可能过高，这属于正常情况。将产品放置在通风的位置直至甲 醛数值降到0.05以下后使用。 2 设备长期不用时请放置在干燥通风处。 3 请远离酒精、香水、油烟等高浓度污染环境，如受污染请通风 处理。