两轮自平衡小车毕业设计04161120.docxVIP

两轮自平衡小车毕业设 两轮自平衡小车毕业设 两轮自平衡小车的设计 最近这几年来，自平衡电动车的研发与商用获得了快速发展。自平衡车具有 体积小，运动十分灵活，便利，节能等特点。本文提出了一种双轮自平衡小车的设计方案，机械结构采用了双轮双马达驱动；控制主要采用的是反馈调节，为了使车体更好的平衡，使用了PID调节方式；硬件上采用陀螺仪GY521 MPU-6050来采集车体的旋转角度以及旋转角加速度，同时采用了加速度传感器来间接测量车体旋转角度。采用意法半导体ST公司的低功耗控制器芯片stm32作为主控，采集上述传感器信息进行滤波，分析等操作后进而控制马达的驱动，从而达到反馈调节的闭环，实现小车的自动平衡。系统设计，调试完成后，能够实现各个功能部件之间协调工作，在适度的干扰情形下仍然能够保持平衡。同时，也可以使用手机上的APP通过蓝牙与小车通信控制小车的前进和后退以及转弯。 关键词：自平衡小车 陀螺仪传感器 滤波 APP Design of Two-Wheel Self-Balance Vehicle Abstract In the last few years, with the development of commercial self balancing electric vehicle was developed rapidly. Self balancing vehicle has the advantages of small volume, the movement is very flexible, convenient, energy saving etc.. This paper presents a two wheeled self balancing robot design, mechanical structure adopts double motor drive; controlled mainly by the feedback regulation, in order to make the balance of the body better, with the PID regulation; hardware using gyroscope GY521 mpu-6050 to collect the rotation angle of the car body and the rotation angle acceleration. At the same time, acceleration sensor to measure indirectly body rotation angle. St, the low power consumption controller STM32 chip used as the main control, collecting the sensor information filtering, analysis backward and control motor drive, so as to achieve close loop feedback regulation, the realization of the car automatic balance. System design, debugging is completed, the coordination between the various functional components can be achieved, in the case of moderate interference can still maintain a balance. At the same time, you can also use the APP on the mobile phone with the car to control the cars forward and backward and turning. Key Words: Self balancing car gyroscope sensor filter APP 1.绪论 ........................................................................................................................ 1 1.1研究背景与意义 .......................................