埃克森美孚 1291系列 (脂肪族树脂) 中国产品说明书.pdf

® Hydrocarbon Resin Escorez 1291 PRODUCT SPECIFICATIONS （ ） Specification Test Method 1 Unit Specification Range RB Softening Point （ ） ETM-E-22 2 ℃ 90.0-100.0 Initial Colour(3) ETM-E-13 GC 9.0max. 1、 Product specifications were developed pursuant to ExxonMobil testing and sampling procedures, some of which are equivalent to industry standard test methods. Applicable sampling and testing methods subject to change without notice and available for review on request. 2 、 Test Method based on ASTM E-28-96. 3、 By spectrophotometric analysis of a toluene solution containing 50%resin, in GC(Gardner Colour) unit. Jinsen products are sold based on the product specifications listed above unless otherwise agreed in writing by Jinsen. No representation, warranty, (expressed or implied, of merchantability, fitness or otherwise), or guarantee is made as to the suitability or fitness for use of the product in the customers specific application. It is the users responsibility to confirm the suitability and fitness for use of the product. Specifications are pursuant to ExxonMobil Chemicals sampling and testing procedures in effect at the time of production. Analysis may be performed on representative samples and not the actual product shipped. ESCOREZ® is a trademark of Exxon Mobil Corporation, Used under License by Shanghai Jinsen Hydrocarbon Resins Co.,Ltd. JSIMS-16-03-WL, Version 3