注塑模具设计.pptxVIP

注塑模具设计会计学浇注系统设计Filling System Design徐 昌 煜Charles Hsu浇注系统设计的优先顺序Priorities of Filling System Design产品设计 (Part Design)型腔设计 (Cavity Design)浇口设计 (Gate Design)流道设计 (Runner Design)喷嘴设计 (Nozzle Design)主流道Sprue浇口Gate产品Part分流道Main Runner冷料井Cold Slug Well次分流道Branch Runner典型的浇注系统Typical Filling System浇口设计Gate Design徐 昌 煜Charles Hsu浇口数目The Number of Gates每增加一个浇口，至少要增加一条熔接痕，同时还要增加一个浇口痕迹、较多的困气以及流道的体积。Once a gate is added, one weld line, at least, one gate mark, more air traps and more runner volume will be added.在型腔能够如期充填的前提下，浇口的数目是愈少愈好。As long as the cavity is able to be filled, as expected, gates are the