土木工程毕业设计-济南某科技学院行政楼设计.pdfVIP

摘要 本次毕业设计的是济南某科技学院行政楼。设计的内容主要包含建筑设计与结构 设计。毕业设计是每一个土木学子的必修课程，我的设计采用的是钢混现浇框架结 构，建筑层数一共为4层，建筑的总高度 15.3m，长为54.6m，宽为16.8m，总建筑面 2 2 积3669.12m，底层占地面积为917.28m 。设防烈度为6度，地震分组为第三组。本次 设计的框架受力钢筋基本采用Ⅱ级钢筋，而箍筋部分主要采用 Ⅰ级钢筋；因为有柱网 的限制，基础采用的是钢混柱下独立基础。整个方案的设计从构思到最终确定都做了 详细的构造要求与合理性验算，基本符合。 通过本次设计中平面图、立面图、剖面图以及构造图的绘制，让我完全熟悉了本 次设计的流程，记住了一些结构设计中的计算方法。结构设计主要取横向一榀框架进 行内力分析与计算，让我在温习前面所学知识的同时又将它们融会贯通，加上CAD、 PKPM等软件对数据的计算，让我顺利完成了本次毕业设计。 关键词：钢筋混凝土结构，独立基础，行政楼，一榀框架 ABSTRACT The graduation project is a technology college Jinan administration building. Content designed mainly includes architectural design and structural design. Graduation is a civil engineering students each compulsory course, my design uses a cast steel-concrete frame structure, building layers of a total of 4 floors with a total building height 15.3m, length 54.6m, width of 16.8m, The total construction area 3669.12m2, the bottom area of ​ ​ 917.28m2. 6 degrees fortification intensity earthquake grouped into a third group. The framedesignofthebasicuseofthereinforcedsteelgrade Ⅱ,andstirruppartmainly Ⅰgrade steel; because there are limitations column net basis is used in steel-concrete independent foundation under column. The design of the entire program from concept to finalized, a detailedconstructionrequirementsandreasonablenesschecking,inline. Through this design, floor plans, elevations, sections and structure mapping, so I was completelyfamiliarwiththedesignprocessofthis,rememberthecalculationmethodofsome structuraldesign.Takeamaintransverse structuraldesignPinframeworkForce analysisand calculation,letmewhattheyhave learnedinthepreviousreviewbutwilltheirmastery,plus CAD,PKPMsoftwarecalculatesthedata,soIsuccessfullycompletedthisgraduationproject . KEYWORDS:reinforcedconcretestructure,theindependentfoundation,Administration building,aPinframework