FU350链式输送机讲解.pdfVIP

FU350 链式输送机 摘 要 随着现代工业的迅速发展，越来越多的新产品出现了， FU 链式输送机是一 种新兴的输送设备，它主要用于水平（或倾角≤ 15°）条件下输送粉状粒物料。 它与螺旋输送机，皮带输送机及其它输送机设备相比，具有运转可靠，节能高效， 密封安全且维修方便等特点，在建材行业中有广泛的应用。 当物料层之间的内摩擦力大于物料与槽壁之间的外摩擦力时，物料就会随着 链一起运动。当物料层厚度与机槽宽度的比值满足一定条件时，物料流量稳定， 从而达到预期的输送效果。在链式输送机的设计过程中，在结合前人的经验的基 础上加上自己的创新，设计出更加使用的设备。 主要特征： 设计合理，输送链强度高，结构简单，操作方便，速度较低，节约电能，密 封性好，对环境的污染小。 关键词： 物料，运动，内摩擦力，流量，稳定 I FU350 Chain Conveyor ABSTRACT Along with the rapid development of modern industry, more and more new products, FU chain conveyer is a new type of carrying facilities, it is mainly used for level (or Angle) under the conditions of transport powder materials. It with screw conveyor or belt conveyor belt or other equipment, reliable operation, saving energy efficient, safe and convenient maintenance sealing etc, It is widely used in the building materials industry. When the material layer in the internal friction materials and slot in greater friction between the wall outside, the material will be together with exercise. When the material layer thickness and width ratio of the slot machine can meet certain conditions, material flow, so as to achieve the expected stable conveying effect. Main features: Reasonabledesign, conveying chain high intensity, simple structure, convenient operation, low speed, good sealing, saving energy and environmental pollution. KEY WORDS: Materials，motion, internal friction ，flow ，steady II 目录 前 言 1 第 1 章 方案的确定 3 1.1 方案的确定 3 1.2 各机型技术参数和链速推荐表 4 1.3 倾斜输送时的折扣系数 η 6