资料文本讲义案例trim line estimation.pptxVIP

DYNAFORM 5.6 Training TutorialBlank Size EngineeringTutorial IVDescriptions for trim line estimation function of Mstep.Open and Save as the DatabaseStart up Dynaform 5.6.Click File?Open and select \Tutorial_ 4_triming_line_estimation\MSTEP_Model4.df file.Click File?Save As (See Figure 1).Enter MSTEP_Model4_(user name)_(date).df as the file name.Click Save to save the database.The data model is shown in Figure 2. In the file of this case, there are meshed models, products, flanges and formed CAD surfaces.Figure 1Figure 2ii.Check Part in DatabaseClick Parts?Turn on to display four Part in the database: Die1, Die2, Product1 and Flange.Toggle on Only Select On option and click on Die1 and Die2 respectively. As shown in Figure 3, a complete drawing die face is composed of Die1 and Die2.Click Product1 and Flange respectively. As shown in Figure 4, a, product after flanging is composed of Product1 and Flange. Flange is the flanging part.Toggle off Only Select On option and simultaneously open Die2 and Flange. As shown in Figure 5, Flange, which is counted from the die fillet of Die2, share the same boundary line with Die2. This boundary line will be defined as constraint in the subsequent operation.Figure 3Figure 4Figure 5iii. Mesh Check and RepairToggle off Surface.Select BSE Preparation?Model Check/Repair (See Figure 6.a).Click Boundary Display icon（the second icon in the first row）(See Figure 6.b).Toggle off Elements and Node.Click (free rotation) to rotate the model.Click (clear highlight) to make sure that each part only has one complete boundary line (See Figure 6.c and 6.d). Click to display the model in isometric view.Click Auto Normal icon (the first icon in the first row).Select CURSOR PICK PART to move the cursor to select an element on the model.Select Yes to make sure the mesh normal direction of each part is consistent. Click Exit to dismiss the dialog box.Click OK to exit Model Check/Repair dialog box.(c)(a)(d)(b)Figure 6iv. MSTEP