TFT触摸屏笔中断应用收集.pdfVIP

Texas Instruments Incorporated Data Acquisition Understanding the pen-interrupt (PENIRQ) operation of touch-screen controllers Precision Analog Applications, High-Performance Analog, By Wendy Fang, and Ing-Yih James Wang,Design Engineer, Precision Analog Introduction ——— PENIRQfunction The TSC2003 1 and TSC2007 2 are both four-wire touch- ———— To understand the PE NIRQ function, we must first start screen controllers (TSCs) with an I 2C interface. These two with the operation of the entire TSC200x touch screen devices are completely hardware-compatible with respec- system. tive TSSOP-16 packages; they are also software-compatible As Figure 1 shows, there are two interfaces in a TSC in many applications. 3 system: one is the analog interface (X+, X –, Y+, and Y –) The digital output, or hardware interrupt pin on a between the TSC and the touch panel, and the other is the ———— TSC2003 or TSC2007 device is called PE NIRQ . It provides ———— digital interface (SCL, SDA, and PE NIRQ ) between the rich information on the touch screen system and its vari- TSC and the host processor. The digital interface is at the ous connections. For example, this pin indicates whether center of the discussion in this article. the TSC device works