Quartus II 时序约束方法.ppt

Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;;;;;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Timing Summary Table;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Follow TimeQuest flow Use -post_map argument for synthesis (mapping) only netlist If design already fully compiled, choose -post_fit (default) Tasks list command defaults to post-fit, so must use Netlist menu in GUI Zero IC delays auto-enabled with Post-map Assumes no interconnect delays to determine if it will be possible to meet timing;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;SDC constraints are not stored in QSF TimeQuest can use script to convert QSF timing assignments to SDC Constraints menu Done automatically if no SDC when first opening TimeQuest See Quartus II Handbook Chapter, “Switching to the TimeQuest Timing Analyzer” for details Differences between Classic Timing Analyzer and TimeQuest Details on conversion utility Online training also available Switching to the TimeQuest Timing Analyzer;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;FPGA/CPLD or ASSP ;Quartus II 时序约束方法;;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时序约束方法;Quartus II 时